Standard Sata Ah Controller Driver

I know you can 'rollback' the driver version on the drivers tab in the properties menu for a particular device in the Device Manager, but am not sure if that is the same as noted in the article. I also know that your the SATA MODE must be set to AHCI in the BIOS instead of IDE. Download the latest drivers for your Intel(R) 7 Series Chipset Family SATA AHCI Controller to keep your Computer up-to-date. Driver Scape Windows Driver Download Center.

Nov. 06, 2018 / Updated by Bessie Shaw to Windows Driver Solutions

SATA AHCI driver is crucial if you want to install Windows in AHCI mode instead of IDE. AHCI (Advanced Host Controller Interface) makes NCQ (Native Command Queuing) as well as hot-plugging or hot swapping through SATA (Serial ATA) host controllers possible. Before you enable AHCI mode in BIOS/UEFI, make sure you’ve download and install correct AHCI driver.

How to Download and Install SATA AHCI Driver on Windows OS

If you are not sure whether there is SATA AHCI driver installed, or if you encounter driver problems when installing the AHCI driver, don’t worry. This tutorial will show you how to download and install the SATA ACHI driver.

Way 1: Download and Install SATA AHCI Driver Manually

1. Download the AHCI driver from the Internet.

For example, if you are going to install Asus AHCI driver for windows 10, you can go to the Asus support page and download the exact SATA AHCI driver you need. You can also download the driver elsewhere, but make sure the driver is digitally signed in case Windows 10 Anniversary driver signature issue occurs (if your Windows OS is a clean install of Windows 10 Anniversary).

Read More: How to Check Unsigned Drivers on Windows 10

2. Install the Driver

Use Windows shortcut keysWin + X to launch the Jump List and select Device Manager. And then expand the IDE ATA/ATAPI controllers entry. Navigate to your SATA AHCI controller, which is the device you are going to install the driver on. Right click on it and select Update Driver Software.

Click Browse my computer for driver software.

And then click Let me pick from a list of device drivers on my computer.

Choose the model from the box, and then click Have disk.

Click Browse to locate the SATA AHCI driver file you’ve stored, and then click OK to install the driver.

After you finish the installation, restart the computer to make the driver take effect. Now you can enter the BIOS to enable the AHCI mode.

Way 2: Download and Install SATA AHCI Driver Automatically

Download SATA AHCI driver manually is time-consuming and if you install the driver in an incorrect way, serious PC problems like random restarts, INACCESSIBLE_BOOT_DEVICE error on Windows 10, 100% disk usage, etc. may occur suddenly.

If you want to download and update SATA AHCI driver easily, try the all in one driver update utility, Driver Talent, then you can download and install the driver one time and fix the AHCI driver problem easily.


Just click the button above to get it directly and follow the steps below to install the SATA driver quickly.

1. Do a Free Scan for Your Computer

Click Scan to detect whether there exist missing or incorrect configured AHCI driver.

2. Download and Install the Driver in One Click

Click Update to download proper AHCI driver for Windows. Or click Repair to fix the driver problem instantly.

Standard Sata Ah Controller Driver Reviews

Sata

3. Restart the PC

Don’t forget to reboot to make the driver changes take effect.

Note:

1. Remember to back up drivers or create a system restore point before any system changes, or windows crashes will annoy you.

2.Below are parts of the SATA drivers for various brands of PCs, and you could click the links to download the drivers manually.

For more AHCI drivers, click here.

Hope this helped you install the SATA AHCI driver successfully and you finally can enable the AHCI mode in BIOS. If you have any other Windows issues, check for solutions in Resource Center in this site, or comment below directly please.

Sata Controller Driver

360 Total Security BusinessDriver Talent for Network Card
Deploy critical protection to secure your corporate dataDownload & Install Network Drivers without Internet Connection
30-day Free TrialFree Download
Please enable JavaScript to view the comments powered by Disqus.

After upgrade from Windows 7, 8 to Windows 10, all the drivers will update including the SATA AHCI Controller to compatible with the new system. Updating SATA AHCI controller driver will make the Windows 10 system run faster. But sometimes, you will find this device changes to Standard SATA AHCI Controller below the IDE ATA/ATAPI controller, and your computer runs slow.

So how to solve the standard SATA AHCI controller error and update its driver will be more helpful for the computer speed.

What is AHCI?

AHCI is short for Advanced Host Controller Interface. The AHCI supports Windows Vista and the later system such as Windows 7, 8 and Windows 10. AHCI and IDE (Integrated Drive Electronics) are two different modes for the internal hard drive storage controller. AHCI is faster than IDE and it support the new technologies such as hot plugging and native command queuing (NCQ). In BIOS OnChip SATA Type, choose the AHCI will be more effective than the IDE mode especially when you are using the SSD.

So if need, after upgrade the system to Windows 10, or you add a new hard drive to the motherboard, try to update the SATA AHCI controller driver will be necessary.

1. Open device manager.

2. Expand IDE ATA/ATAPI controllers tree and find the SATA AHCI Controller, sometimes, it is a Standard SATA AHCI controller.

3. Right-click Intel(R) 8 Series/C220 Chipset Family SATA ACHI Controller or standard SATA AHCI controller, and choose the first option Update Driver Software from the context menu.

4. In the Update Driver software window, select the first option: Search automatically for update driver software to update the Intel SATA AHCI Controller driver.

After that, windows will automatically search the latest version of driver from the Internet especially Intel official site and install it for you automatically.


Update Standard Sata Ahci Controller

You can also use Driver Doctor to help you scan your computer for the new hard drive or update the Standard SATA AHCI driver.

Standard Sata Ah Controller Driver Download


You can download the Driver Doctor from here:
Install and run it on Windows 10.

After download and run this software, following these steps: Scan Now > Get Drivers.

After scan, you can see the Intel (R) 8 Series/C220 Chipset Family SATA AHCI Controller need to update.

Click Download button to download it.

After download finished, you can click Install button to install it. This is an Intel R Rapid Storage Technology.

After the installation finish, you need to restart the computer to make your updated SATA AHCI controller driver work.

Please enable JavaScript to view the comments powered by Disqus.